Why Choose Magic Shield Graphene Coating (Advanced)?
Magic Shield Graphene Ceramic Coating (Advanced) delivers the perfect mix of graphene flexibility + ceramic hardness, producing a deep, reflective gloss that protects like a shield.
✦ 100% more active graphene resin than standard coatings.
✦ Deepens color & clarity for a wet mirror finish.
✦ Prevents micro-marring and swirl buildup.
✦ Resists UV, chemicals, and oxidation for 5 years.
💡 Graphene + SiO₂ = Stronger Bond · Richer Gloss · Longer Protection .
Steps
Before You Begin
-
-
Park your car in a shaded, dust-free area with a surface temperature between 15°C and 24°C (60°F–75°F).
-
Prepare the vehicle by thoroughly washing it and removing all previous wax, grease, and contaminants using Magic Shield Prep Spray.
-
Prepare the Applicator
-
-
Shake the coating bottle vigorously.
-
Replace the bottle cap with the white tip included in the package.
-
Apply 6–10 drops of the coating onto the suede applicator pad.
-
Apply the Coating
-
-
sing the applicator, swipe in straight, overlapping lines (side-to-side or up-and-down) on one section of the vehicle at a time.
-
Keep the suede applicator pad moist by adding a few drops of coating every 2–3 swipes to ensure even application.
-
Allow to Flash
-
-
Let the coating sit for 3–5 minutes depending on the temperature:
-
15°C (60°F): 5 minutes
-
20°C–25°C (70°F–80°F): 3 minutes
-
-
Look for a light rainbow haze (“flashing”) to appear on the surface.
-
Buff the Surface
-
-
-
Use a clean microfiber towel to buff away the rainbow haze.
-
Work quickly and thoroughly to avoid excessive haziness.
-
Inspect each panel from multiple angles to ensure even and smooth coverage.
-
-
Allow the Coating to Cure
-
-
-
Initial Curing: Keep the vehicle in a moisture-free, temperature-controlled environment for at least 8 hours.
-
Full Curing: Allow the coating to cure indoors for 36 hours before exposing the vehicle to the elements.
-
During this time, avoid water, debris, or physical contact with the surface.
-
-
Tips for Best Results
-
-
-
Always work in a well-ventilated area.
-
Use clean and dry microfiber towels to prevent scratches.
-
Avoid applying the coating to hot surfaces or under direct sunlight.
-
-
Whether you’re protecting a brand-new finish or restoring an older one, Magic Shield makes application simple.
Quick 3-Step Application:
1️⃣ Shake well & apply 6-10 drops to applicator.
2️⃣ Spread evenly on cool panel (cross-hatch or straight lines).
3️⃣ Let flash 3-5 min, then buff rainbow haze with microfiber.
🕐 Curing: Keep indoors 8-12 hours, avoid moisture 24 hours.
Why Choose Magic Shield Graphene Coating?
Will it fix scratches?
No — it prevents light marks and swirls.
Can I use on glass or PPF?
Yes — safe for paint, plastic, glass & film.
How long does it last?
Up to 5 years with proper care.
Need to polish first?
Recommended for oxidized paint.
Maintenance?
pH-neutral wash + optional Graphene Spray top-up.
1 × Graphene Ceramic Coating Bottle (50 ml).
Suede pad
Pair of Gloves
Applicator block
Why Choose Magic Shield Graphene Coating (Advanced)?
Magic Shield Graphene Ceramic Coating (Advanced) delivers the perfect mix of graphene flexibility + ceramic hardness, producing a deep, reflective gloss that protects like a shield.
✦ 100% more active graphene resin than standard coatings.
✦ Deepens color & clarity for a wet mirror finish.
✦ Prevents micro-marring and swirl buildup.
✦ Resists UV, chemicals, and oxidation for 5 years.
💡 Graphene + SiO₂ = Stronger Bond · Richer Gloss · Longer Protection .
Steps
Before You Begin
-
-
Park your car in a shaded, dust-free area with a surface temperature between 15°C and 24°C (60°F–75°F).
-
Prepare the vehicle by thoroughly washing it and removing all previous wax, grease, and contaminants using Magic Shield Prep Spray.
-
Prepare the Applicator
-
-
Shake the coating bottle vigorously.
-
Replace the bottle cap with the white tip included in the package.
-
Apply 6–10 drops of the coating onto the suede applicator pad.
-
Apply the Coating
-
-
sing the applicator, swipe in straight, overlapping lines (side-to-side or up-and-down) on one section of the vehicle at a time.
-
Keep the suede applicator pad moist by adding a few drops of coating every 2–3 swipes to ensure even application.
-
Allow to Flash
-
-
Let the coating sit for 3–5 minutes depending on the temperature:
-
15°C (60°F): 5 minutes
-
20°C–25°C (70°F–80°F): 3 minutes
-
-
Look for a light rainbow haze (“flashing”) to appear on the surface.
-
Buff the Surface
-
-
-
Use a clean microfiber towel to buff away the rainbow haze.
-
Work quickly and thoroughly to avoid excessive haziness.
-
Inspect each panel from multiple angles to ensure even and smooth coverage.
-
-
Allow the Coating to Cure
-
-
-
Initial Curing: Keep the vehicle in a moisture-free, temperature-controlled environment for at least 8 hours.
-
Full Curing: Allow the coating to cure indoors for 36 hours before exposing the vehicle to the elements.
-
During this time, avoid water, debris, or physical contact with the surface.
-
-
Tips for Best Results
-
-
-
Always work in a well-ventilated area.
-
Use clean and dry microfiber towels to prevent scratches.
-
Avoid applying the coating to hot surfaces or under direct sunlight.
-
-
https://www.youtube.com/watch?v=YupEB0ydAhA
Whether you’re protecting a brand-new finish or restoring an older one, Magic Shield makes application simple.
Quick 3-Step Application:
1️⃣ Shake well & apply 6-10 drops to applicator.
2️⃣ Spread evenly on cool panel (cross-hatch or straight lines).
3️⃣ Let flash 3-5 min, then buff rainbow haze with microfiber.
🕐 Curing: Keep indoors 8-12 hours, avoid moisture 24 hours.
Why Choose Magic Shield Graphene Coating?
Will it fix scratches?
No — it prevents light marks and swirls.
Can I use on glass or PPF?
Yes — safe for paint, plastic, glass & film.
How long does it last?
Up to 5 years with proper care.
Need to polish first?
Recommended for oxidized paint.
Maintenance?
pH-neutral wash + optional Graphene Spray top-up.
No — it prevents light marks and swirls.
Yes — safe for paint, plastic, glass & film.
Up to 5 years with proper care.
Recommended for oxidized paint.
pH-neutral wash + optional Graphene Spray top-up.
1 × Graphene Ceramic Coating Bottle (50 ml).
Suede pad
Pair of Gloves
Applicator block
Perfect For
- New cars needing an invisible shield.
- Older paint needing restoration & gloss.
- Daily drivers exposed to UV, dust & rain.
- Paint, Plastic, PPF, Windshield.
Not For
- Hot panels / direct sunlight.
- Dirty surfaces or interior materials.
Recommended Detailing Combo
- Iron Remover → Decontaminate
- Clay Bar → Smooth surface
- Prep Spray → Strip oils
- Graphene Coating → Seal & protect
Dense graphene network blocks UV damage, chemicals, and oxidation.
- UV Protection
- Chemical Resistance
- Oxidation Defense
Mirror Gloss & Extreme Water Beading
Hydrophobic surface repels water and grime instantly.
- Looks Wet, Stays Clean
- Effortless maintenance
Versatile Surface Compatibility
One coating for paint, glass, plastic, and film surfaces.
- Safe for all exterior finishes
- Perfect for daily drivers or garage kept vehicles
Graphene + SiO₂ Hybrid Technology
Combines graphene’s flexibility with ceramic hardness for superior bonding & longevity.
Trusted by Detailers, Loved by DIYers
Pro-level gloss and protection in 3 simple steps — ideal for enthusiasts and pros alike.
Magic Shield Graphene Coating combines: Mirror Gloss · Extreme Water Beadingp.
Graphene + SiO2 protection
A deeper finish. A tougher daily barrier.
Magic Shield Graphene Ceramic Coating bonds to properly prepared exterior surfaces to create a slick, high-gloss layer that sheds water and helps simplify maintenance.
Up to 5 yearswith correct prep, application, and care
50 mLenough for a sedan or small SUV
4.8 / 5from 145 customer reviews
Why Graphene Ceramic Coating
See the benefit, not just the promise.
Select a result to match the visual with the way the coating performs in real ownership.
Benefit shown in detail
Optical depth
Richer gloss
On properly prepared paint, the levelled coating sharpens reflections and gives colour a deeper, cleaner appearance.
- Deeper reflections
- Richer colour depth
- Freshly detailed finish
Finish comparison
Drag to inspect the difference.
Preparation makes the result possible. A correctly levelled coating reveals cleaner reflections and a more uniform finish.
BeforeVisible haze and diffuse reflectionsAfterSharper depth and cleaner body linesHonest expectationThe coating enhances prepared paint; it does not repair deep damage.
BeforeAfter
Real vehicles. Real-world finish.
Results from the driveway.
Customer vehicles photographed in everyday light show the gloss, colour depth, and clean reflections owners notice after proper preparation and application.
Deep reflections across large panels.
Black paint makes surface clarity easy to judge—from the hood to the side body lines.
Red stays bold in daylight.
Crisp reflections on complex lines.
Deeper glossMore visual depth on prepared paint.Slicker finishA smooth, freshly detailed surface.Easier upkeepHydrophobic behaviour supports routine care.
Four controlled steps
A professional-looking process you can own.
01PrepareWash, decontaminate, correct if needed, and fully dry the paint.02ApplyUse a few drops and work one small panel section at a time.03Level and buffAllow the product to flash, then level it gently with a clean towel.04Protect the cureKeep the finish clean and dry while the coating develops.2–4 hrbefore an optional second layer24 hrkeep the vehicle dry7 daysavoid washing
Everything needed to apply
One complete 50 mL kit.
No guesswork at checkout. Each kit includes the coating and essential application accessories.
- 50 mL coating
- Suede applicator
- Removal towel
- Protective gloves
- Application guide
- Storage box
1 bottlesedan or small SUV2 bottleslarge SUV or two vehicles3 bottlesmulti-vehicle value
Set yourself up for success
Know when it is the right product.
Perfect for
- New vehicles needing long-term exterior protection
- Corrected older paint ready for a gloss boost
- Daily drivers exposed to sun, rain, and road film
- Prepared paint, glass, wheels, trim, and PPF
Not for
- Hot panels or direct sunlight
- Dirty, oily, or damp surfaces
- Interior fabrics or unfinished porous materials
- Covering deep scratches or failed clear coat
Recommended prep
- 1. Wash and chemically decontaminate
- 2. Clay the surface if it still feels rough
- 3. Polish defects when needed
- 4. Use a panel prep to remove oils before coating
Questions, answered
Buy and apply with confidence.
How long can the coating last?
With correct preparation, application, curing, and maintenance, the coating can protect for up to five years. Climate, mileage, storage, and wash habits affect longevity.
Can a first-time user apply it?
Yes. Work indoors or in shade on cool, clean, dry paint with good lighting. Apply one small section at a time and follow the included instructions.
Does it make paint scratch-proof?
No coating makes paint scratch-proof. It adds a sacrificial layer that helps resist light wash marring and everyday exposure but cannot stop deep scratches, chips, or impact damage.
How is it different from wax or spray protection?
Wax and spray sealants generally need more frequent reapplication. This liquid coating bonds to correctly prepared surfaces for a longer-lasting, slick hydrophobic layer.
Can it be used on glass, trim, wheels, or PPF?
It can be used on properly prepared exterior paint, automotive glass, painted wheels, exterior trim, and compatible paint-protection film. Always test a small inconspicuous area first.
How should I maintain it?
Use a pH-neutral shampoo, soft wash media, and gentle drying. Avoid abrasive automatic brushes. Remove bird droppings and harsh contamination promptly.
Magic Shield confidence
Five-year potential. One driveway-friendly system.
Free U.S. shipping, a 30-day satisfaction guarantee, secure checkout, and product support when you need it.
I accidentally spilled a drop on my garage floor and let it dry. I tried to scrape it off the next day and it was hard as a rock. That gives me confidence it will protect my car paint from rock chips.
Phenomenal gloss. My grey Mazda 3 looks like it’s made of liquid metal.
The instructions were clear: Prep is key! I spent a full day polishing my paint before applying this. The bond seems incredibly strong. It cured into a hard, glass-like shell.
I used this on my boat’s fiberglass gel coat. It sealed the surface perfectly. No yellowing from the sun so far.
My neighbour paid $1500 for a graphene coating at a shop. I did mine with this kit for a fraction of the price and my car looks just as good. It requires elbow grease, but the savings are huge.