Magic Shield Diamond AI Coating
Restore tired paint. Lock in a deep, mirror-like finish.
A self-leveling coating system made for aged, dull, swirled, or oxidized painted surfaces—designed for a smooth DIY application without machine polishing.
A smoother result starts with the right process.
Follow the supplied directions and the guidance shown above. Work in a controlled environment and inspect the finish before the coating begins to cure.
Wash, decontaminate, degrease, and completely dry the painted surface.
Saturate the applicator and move in one straight direction without repeatedly crossing the same area.
Check the finish within 15 minutes and correct any uneven area immediately.
Keep the surface protected from water, rain, washing, and unnecessary touching during cure time.
Who is Diamond AI Coating made for?
It is intended for older painted surfaces showing dullness, oxidation, swirl marks, or light imperfections. It is not the recommended first choice for factory-new paint.
Does the coating need to be machine polished or buffed?
No. The supplied application method is designed to self-level without machine polishing. Careful preparation and a single-direction application are still important.
Where can I apply it?
Use it only on the compatible painted and headlight surfaces identified in the product guide. Do not apply it to glass, carbon fiber, or PPF.
Why is the 15-minute inspection important?
It gives you the best opportunity to spot and correct an uneven area before the coating hardens further.
Can Graphene Coating be applied afterward?
Yes, after Diamond AI has fully cured and the waiting period in the supplied instructions has passed, Magic Shield Graphene Coating can be used as the second step in the system.
This is not a wax that washes off. This is a permanent resurfacing. I applied it to the roof of my Honda Civic which was starting to look white from oxidation. It soaked in and turned the paint dark blue again. It literally looks like I re-clear coated it.
I was quoted $800 to wet sand and polish my 2009 Ford F-150. The paint was dull and had “pinstripes” from driving through brush. I decided to try this Diamond AI coating instead. It filled in 90% of the scratches and restored the shine instantly. The best part? No buffer needed. Just wipe on and walk away.
Finally, a product that fixes the problem instead of just covering it up with oil. This is a permanent repair in a bottle. Highly recommend for older vehicles.
I accidentally got some on my glass and had to polish it off immediately. It cures FAST. Be careful with your application. But on the paint, it’s flawless.
If you are selling a used car, use this first! I put it on my old Camry before listing it. The buyer thought I had kept it in a garage its whole life. It added so much value to the car.