Why Choose Magic Shield Prep Spray?
Magic Shield Prep Spray is the critical step before coating. Oils, wax, and polish residue prevent coatings from bonding properly, leading to premature failure. Our 75% formula strips away everything—leaving paint perfectly bare for the ultimate bond and maximum durability.
Professional-grade cleaning power
Safe on clear coat, wraps, chrome & glass
Prevents coating failure from poor prep
Works before ceramic, graphene, or wax coatings
Just Spray, Wipe & Coat — No Rinsing Needed.
1️⃣ Spray generously onto a cool, clean surface.
2️⃣ Wipe immediately with a clean microfiber towel.
3️⃣ Inspect & repeat if necessary.
- Use a second towel for final buff to ensure no residue remains .
Steps
BEFORE YOU BEGIN:
-
-
-
-
Prepare the Environment:
-
Park your car in a shaded, dust-free area with a surface temperature between 15°C and 24°C (60°F–75°F).
-
Ensure you have access to a hose and water for rinsing after application.
Clean the Vehicle:
-
Wash the car thoroughly before applying the Prep Spray. This ensures the surface is free of dirt and contaminants.
-
-
-
-
PREPARE THE APPLICATOR
-
-
-
-
Shake the bottle of Prep Spray well to ensure the formula is evenly blended.
-
Ensure the surface is cool to the touch before starting.
-
-
-
APPLY THE PREP SPRAY
-
-
-
Hold the bottle 6–8 inches away from the surface and spray a light, even coat on the target area.
-
Work in Sections: Focus on small sections (e.g., half of hood or one door panel) to ensure thorough coverage and ease of buffing.
-
-
BUFF THE SURFACE IMMEDIATELY
-
-
-
-
-
Spread Evenly: Use a clean microfiber towel to spread the spray across the surface.
-
Buff Off Residue: Flip the towel to a dry side and buff the area until it is streak-free.
-
Important: Buff and rinse the treated area within 15 minutes to prevent residue from drying on the surface.
-
-
-
-
RINSE AND CLEAN
-
-
-
-
-
Rinse the entire treated area thoroughly with clean water after buffing.
-
Final Wash: A final wash ensures the surface is completely clean and ready for ceramic coating.
-
-
-
-
READY FOR COATING
-
-
-
-
-
Once the surface is clean and fully prepped, proceed with the ceramic coating application.
-
Apply the coating in a controlled, dust-free environment for best results.
-
-
-
-
TIPS FOR BEST RESULTS:
-
-
-
-
Always work in a well-ventilated area.
-
Use clean and dry microfiber towels to avoid scratches or streaks.
-
Avoid applying the Prep Spray on hot surfaces or under direct sunlight.
-
Ensure you rinse and wash thoroughly after applying the Prep Spray to maximize the coating bond.
-
-
-
Why Choose Magic Shield Prep Spray?
Will it damage my paint?
No — it’s non-acidic, coating-safe, and clear-coat friendly.
Can I use it on PPF and vinyl wraps?
Yes — safe for all coated and wrapped surfaces.
Why 75%?
Most preps are 30–50%. Ours is optimized at 75% for maximum residue removal without surface damage.
Do I need to rinse after?
No — simply wipe until dry and residue-free.
When should I use it?
Before applying ceramic, graphene, or wax coatings; after polishing; or whenever you need a perfectly clean base.
1 × Magic Shield Prep Spray Bottle (473ml / 16oz)
Precision trigger sprayer
Why Choose Magic Shield Prep Spray?
Magic Shield Prep Spray is the critical step before coating. Oils, wax, and polish residue prevent coatings from bonding properly, leading to premature failure. Our 75% formula strips away everything—leaving paint perfectly bare for the ultimate bond and maximum durability.
Professional-grade cleaning power
Safe on clear coat, wraps, chrome & glass
Prevents coating failure from poor prep
Works before ceramic, graphene, or wax coatings
Just Spray, Wipe & Coat — No Rinsing Needed.
1️⃣ Spray generously onto a cool, clean surface.
2️⃣ Wipe immediately with a clean microfiber towel.
3️⃣ Inspect & repeat if necessary.
- Use a second towel for final buff to ensure no residue remains .
Steps
BEFORE YOU BEGIN:
-
-
-
-
Prepare the Environment:
-
Park your car in a shaded, dust-free area with a surface temperature between 15°C and 24°C (60°F–75°F).
-
Ensure you have access to a hose and water for rinsing after application.
Clean the Vehicle:
-
Wash the car thoroughly before applying the Prep Spray. This ensures the surface is free of dirt and contaminants.
-
-
-
-
PREPARE THE APPLICATOR
-
-
-
-
Shake the bottle of Prep Spray well to ensure the formula is evenly blended.
-
Ensure the surface is cool to the touch before starting.
-
-
-
APPLY THE PREP SPRAY
-
-
-
Hold the bottle 6–8 inches away from the surface and spray a light, even coat on the target area.
-
Work in Sections: Focus on small sections (e.g., half of hood or one door panel) to ensure thorough coverage and ease of buffing.
-
-
BUFF THE SURFACE IMMEDIATELY
-
-
-
-
-
Spread Evenly: Use a clean microfiber towel to spread the spray across the surface.
-
Buff Off Residue: Flip the towel to a dry side and buff the area until it is streak-free.
-
Important: Buff and rinse the treated area within 15 minutes to prevent residue from drying on the surface.
-
-
-
-
RINSE AND CLEAN
-
-
-
-
-
Rinse the entire treated area thoroughly with clean water after buffing.
-
Final Wash: A final wash ensures the surface is completely clean and ready for ceramic coating.
-
-
-
-
READY FOR COATING
-
-
-
-
-
Once the surface is clean and fully prepped, proceed with the ceramic coating application.
-
Apply the coating in a controlled, dust-free environment for best results.
-
-
-
-
TIPS FOR BEST RESULTS:
-
-
-
-
Always work in a well-ventilated area.
-
Use clean and dry microfiber towels to avoid scratches or streaks.
-
Avoid applying the Prep Spray on hot surfaces or under direct sunlight.
-
Ensure you rinse and wash thoroughly after applying the Prep Spray to maximize the coating bond.
-
-
-
Why Choose Magic Shield Prep Spray?
Will it damage my paint?
No — it’s non-acidic, coating-safe, and clear-coat friendly.
Can I use it on PPF and vinyl wraps?
Yes — safe for all coated and wrapped surfaces.
Why 75%?
Most preps are 30–50%. Ours is optimized at 75% for maximum residue removal without surface damage.
Do I need to rinse after?
No — simply wipe until dry and residue-free.
When should I use it?
Before applying ceramic, graphene, or wax coatings; after polishing; or whenever you need a perfectly clean base.
No — it’s non-acidic, coating-safe, and clear-coat friendly.
Yes — safe for all coated and wrapped surfaces.
Most preps are 30–50%. Ours is optimized at 75% for maximum residue removal without surface damage.
No — simply wipe until dry and residue-free.
Before applying ceramic, graphene, or wax coatings; after polishing; or whenever you need a perfectly clean base.
1 × Magic Shield Prep Spray Bottle (473ml / 16oz)
Precision trigger sprayer
Perfect For：
- Prepping for ceramic, graphene, or wax coatings .
- Removing polish oils after correction.
- Cleaning glass, chrome, and wheels before sealing.
Not For:
- Hot panels or direct sunlight.
- Interior use.
Detailing Combo System
- Step 1: Iron Remover – Dissolve embedded metal.
- Step 2: Clay Bar – Remove remaining contaminants.
- Step 3: Prep Spray – Strip oils & residue .
- Step 4: Coat – Lock in protection
Four core highlights of Prep Spray
75% Formula Makes the Difference
Stronger than standard preps for unbeatable residue removal
1.Faster cleaning.
2.Better bonding.
3.No streaks.
Paint. Glass. Chrome. Vinyl. Wheels.
1.Non-acidic
2.Coating-safe
3.No staining or etching
Strips out all contaminants for longer-lasting coatings
1.Avoids premature coating failure
2.Improves gloss & durability
Trusted by Pros, Loved by DIYers
Detailer-grade performance — simple enough for home use
1.Spray & wipe application
2.Works with any coating system
Real Customer Results
I applied a glass coating to my windshield and needed the surface to be perfectly oil-free. Windex wasn’t cutting it. This Prep Spray removed all the road film and old rain repellent instantly. My new glass coating bonded perfectly and has lasted through winter.
Great product for stripping old wax. I could literally see the water behavior change from beading to flat sheeting after using this, which means the old protection is gone. My only gripe is the smell—it is VERY strong alcohol. Definitely use it outdoors or with the garage door open. But it works 5 stars.
10/10. Does exactly what it says on the bottle.
This is a heavy-duty cleaner. I bought a used Honda CR-V that had some dealer stickers on the back. I peeled them off, but the sticky residue remained. A few sprays of this Prep Spray and it melted the glue right off without harming the paint. A great bonus use!
I used to mix my own isopropyl alcohol and water in a spray bottle, but I always worried about getting the ratio wrong and damaging my clear coat. This pre-mixed 75% formula gives me peace of mind. It feels safer, lubricates better while wiping, and strips the paint squeaky clean. I prepped my entire BMW M3 with it before ceramic coating. Flawless results.